Services

services1Martec Asset Solutions supports all their products with a high level technical knowledge gained through decades of experience in the industry. As we are a highly skilled dedicated team passionate about reliability of service we ensure personalised attention with a high degree of relationship and service focus for our customers.

Our ranges of service include support for the selection and application of our products from design, engineering, fabrication, assembly, wiring, testing, installation, training through to commissioning, additional options monitoring and surveillance.

services2We provide our customers with customised solutions for their applications each suited to the demands of their assets and environments. From our broad range of offerings we are able to optimise solutions for the specific requirements from Testing, Condition Assessment and Condition Monitoring.

In addition to the generic services of design, engineering, assembly, wiring, testing, installation through to commissioning Martec Asset Solutions provide specific assessment and surveillance services related to specific plant:

CableDIAGNOSTIX ELECTRICAL SYSTEM CONDITION ASSESSMENT
CableDIAGNOSTIX is a unique, non-destructive on-line electrical system condition assessmCableDIAGNOSTIX Electrical System Condition Assessment-1ent process that enables circuit owners at a wide range of commercial/industrial facilities to evaluate the condition of cable systems, transformers, and switchgear.Knowing a cable system’s weaknesses enables owners, asset managers and reliability engineers to be proactive in identifying and repairing problems before they cause outages.

The technology successfully detects the deterioration in cables, splices and terminations on both new and aged cable systems. This innovative technology is now available to all utilities and industrial customers. Over 15,200 Km of cable systems (predominantly distribution and transmission-class) have been assessed in the field. The technology is applicable to all cable types (PILC, XLPE, EPR, Rubber, etc.). Customers, including electric generators and industrial consumers alike, have applied the CableDIAGNOSTIX condition assessment program annually in order to improve the reliability of their power delivery systems.

Click here for more information

ON-LINE SLIP RING TRUING
On-line Slip Ring TruingWhen it comes to resurfacing your rings and commutators, downtime is wasted time.  So why take your unit off-line when the Cutsforth On-line Truing is more cost effective, less time consuming—and, in most cases, more accurate?On-line truing takes place at operational temperature and speed so rings are ground:

  • In reference to the operational centre
  • Less material is removed
  • Life expectancy is extended
  • Brush chatter and vibrations are reduced

Click here for more information

TUBE AND PIPE INSPECTION-ACOUSTICEYE
Non-Traversing tube and pipe inspection. Inner and Outer Diameter Inspection System for Heat Exchangers and BoilersTube and Pipe Inspection-AcousticEye1

Pulse Reflectometry Simple, Efficient Operation Two Modes Operating in Parallel-Acoustic and Ultrasonic

Pulse Reflectometry (PR) is a generic NDT method based on transmitting waves into a tube and measuring the reflections
· Reflections are created by defects in the tube
· Patented algorithms identify and report location, type and size of defects

The DUET™ system employs dual mode pulse reflectometry: acoustic and ultrasonic

· A single probe simultaneously injects two types of pulses down the tube
· Acoustic pulse (Acoustic Pulse Reflectometry – APR): a pulse is sent down the air inside the tube
· Ultrasonic pulse (Ultrasonic Pulse Reflectometry- UPR): a pulse is sent down the tube walls

Defects in the tube create typical signatures in the reflected waves, which are different for each modality.

Ultra Fast Speed
Significantly faster than conventional inspection techniques.  Automatic analysis: can also be performed at a remote location

Easy to Use
Tube and Pipe Inspection-AcousticEye4Consistent, repeatable results regardless of operator skill

Full Coverage
Any shape | u-bends, “s”shape, twisted, fin-fans
Any material | ferromagnetic, non-ferromagnetic

High detectability                                                                                             Non-traversing solution for ID and OD defects, full ID/OD inspection                       Holes,blockages, cracks, bulges, wall loss, erosion, corrosion, pits

Click here for more information

ACOUSTIC MONITORING SYSTEMS AMS FOR POWER BOILERS, FEEDWATER HEATERS AND RECOVERY BOILERS, HSRG-SURVEILLANCE

Surveillance provides a periodic check of the AMS (Acoustic Monitoring System). Triple 5/Martec eAcoustic-Monitoring-Systems-AMS-for-Power-boilers-Feedwater-heaters-and-Recovery-boilers4xamines the data for acoustic changes and hardware problems. Surveillance data can be viewed by, internet AND Virtual AMS (VAMS).  Options available are Daily or Weekly.
Triple 5/Martec provides engineering consultation over the phone for station engineers and operators. If there is a question about the system’s operation, Triple 5/Matec will connect to the system and discuss the data with the plant. A Triple 5/Martec Engineer is available 24 hours a day, 7 days per week for diagnostic services and maintenance consultations.

Click here for more information

Quick Menu

Contact Us

Unit 1 195 Kooyong Rd,
Caulfield North,
3161 VIC, Australia

Telephone: +61 (0) 430 149 665
Email: sales@martecassetsolutions.com.au