H2O Control Products

H2O Control Products are a company located in Sudbury, Ontario specializing in moisture control, anti-corrosion and lubrication products. They service many international power, mining, electrical and engineering companies. The anti-corrosion specific products include:

• H2O Moisture Absorbing Packets Protects Electrical Systems from CorrosionAttracts Water Vapour like a Sponge

  Absorbs 1000x more Moisture than Silica-Gel

  Vastly Out Performs Standard Desiccants

   

• H2O Spin-On Air Filters Protect your air tools with H2O Control Filters. This cutting edge filter media technology eliminates water vapour and free water from compressed air systems, saving both time and money on premature servicing. After filter installation, test and keep your system moisture free by periodically directing the air flow at the Blue Humidity Indicator Dot. If it turns pink the filter needs to be changed 
• H2O Moisture Absorbing Compound H2O Moisture Absorbing Compound (MAC) is a soft grease like material designed to stop water migration into various industrial enclosures. MAC works by bonding to water at the molecular level which turns it from a liquid to a semi-solid gel that is incapable of fluid movement.MAC is easy to use and can be applied using caulking guns, pumping systems, or manual methods. It will not harden which allows for the addition of pulling new wires or working with existing wires. It is recommended that MAC be applied within the conduit or enclosure after installation. MAC is available in 10 oz caulking tubes. 
• H2O Corrosion Control Spray H2O Corrosion Control Pump Spray, Dielectric Strength to 30,000Volts, Superior Moisture Inhibitor.
  • Electrical Enclosures
  • Non-Aerosol Contact Point Protection
  • Corrosion-Free Storage
  • Underground Equipment

   

• H2O Transformer Breathers H2O Transformer Breathers keep the conservator tanks of oil-filled transformers moisture free. Our spin-on filters are the key because these unique filters have been designed to remove water from an air stream as it passes through the filter. When used as a conservator breather it will not only remove particulate from air, but it will also remove any water vapour.This cutting edge technology positions negative valence chemistry within the filter in such a manner as to cause a co-valent bond to form with any positive valence H2O molecules that may be passing through with air and trapping any water vapour within the filter. These water-removing air filters perform in a superior manner and are able to capture 4x their weight of water.

  Silica-gel breather’s efficiencies are limited to approximately 30-40% relative humidity environments due to silica-gel being a ridged structure incapable of expansion. Silica-gel only holds water as a permeating vapour that enters under the principal of vapour pressure differentials that may exist between the granule and its proximate atmosphere. Whereas our spin-on air filter’s superior performance is due to its unique water absorbing structures that are able to expand as they accommodate and hold incoming water under hydrogen bonding principles. Once installed, the ease of just spinning off the old filter and spinning on the new replacement filter during maintenance takes only minutes, it’s no wonder power companies are starting to see the advantages.

   

   

• H2O Water Worm Let WATER WORM remove water from the bottom of your holding tanks.
  • Designed to lie along the bottom of any fuel or oil storage tank
  • Only 1.5 inches wide to easily fit down fill or vent pipes
  • Absorbs only water
  • One worm can absorb up to 16oz of water.

   

• EXCEL 440 Penetrant Aerosol
  • Quickly penetrates metal parts with a light, polarized oil
  • Delivers unsurpassed lubrication to any mechanism
  • Long-lasting lubricant film withstands high temperatures to 250° C (480° F) continuous
  • Non-solid compound does not build up beyond a single, monomolecular layer
  • Provides unsurpassed friction/wear reductionVersatile and highly effective in these following applications:
    • Break-oil for metal fasteners and mechanisms
    • Emergency lube for binding or seizing parts and bearings
    • Chain lubricant for high stress, high temperature applications
    • Cutting oil for drilling, tapping, machining, lathe work, etc.
    • Dielectric Shield to 20,000 volts of electricity
    • Drives out moisture and water-proofs electrical connections

H2O Control’s products have extensive applications, solutions and present real savings for:

Mining/Manufacturing

Automotive
Construction
Filtering Solutions
Manufacturing
Mining
Shipping
Transportation

Electrical

Electrical Enclosures
Maintenance Savings
Moisture Control
Utilities & Energy

Telecom

Dust Control
Humidity Control
IT